IO4-IR-Detector-GBunza-Fingers
IR Detector subassemblies made to look like N or HO scale ties.
Added registration holes to allow solder paste application with stencil.
|
Download IO4-IR-Detector-GBunza-Fingers.JLC-BOM -
Download IO4-IR-Detector-GBunza-Fingers.JLC-CPL -
Download IO4-IR-Detector-GBunza-Fingers.PCBWAY-BOM -
Download IO4-IR-Detector-GBunza-Fingers.PCBWAY-BOM -
Download IO4-IR-Detector-GBunza-Fingers.PCBWAY-Centroid -
Download IO4-IR-Detector-GBunza-Fingers.PCBWAY-Centroid -
Download PT19-21C-L41-TR8.pdf - Documentation
IO4-IR-Detector-GBunza-Fingers Version 1.3
First built: 2018-03
|
|
|
UNPUBLISHED
IO4-IR-Detector-GBunza-Fingers Version 1.2
First built: 2018-03
Added registration holes to allow solder paste application with stencil.
|
|
|
UNPUBLISHED
IO4-IR-Detector-GBunza-Fingers Version 1.1-panel
First built: 2018-03
Added registration holes to allow solder paste application with stencil.
|
|
|
UNPUBLISHED
IO4-IR-Detector-GBunza-Fingers Version 1.0
First built: 2018-01
Basic signal for panelization
|
|
|
UNPUBLISHED
IO4-IR-Detector-GBunza-Fingers Version 1.0-panel
First built: 2018-01
Initial variation based on GBunza’s design. Array generated via ULP needed lots of manual tweeking for DFM and strength.
|
|
|
UNPUBLISHED
Documentation
Works with GBunza's MRCS MRCS-DAPD and SPCoast IO4-IR-Detector-GBunza passive IR Detectors
- E1C is the Ambient transistor, labeled T1 on the MRCS schematic.
- E2C is the between the rails detector transistor.
- Fab with a BLACK silk screen to help blend in to the trackwork.
- Cut to length for N scale
This technical documentation is licensed under the CERN Open Hardware Licence v1.2