cpNode-IOX-Servo
cpNode IOX
16 bit I2C I/O Expander for MRCS cpNode system
Features
- 23017 IO Expander
- local 5v 750mA regulated power for attached accessories
- 0.100 screw terminals for layout connections
- I2C address display
- Daisy chained 7.5c-12v DC unregulated power source feed through
9685 based I2C PWM Servo driver for cpNode
Footprint Libraries
Connector_BarrelJack
Connector_Generic
Connector_PinHeader_2.54mm
Device
Diode
Diode_SMD
Package_SO
Package_TO_SOT_SMD
power
Regulator_Linear
Resistor_SMD
Sensor_Energy
SPCoast
TerminalBlock_Phoenix
ERC/DRC: 8 errors, 0 warnings
Metadata Audit
| Severity | Rule | Value | Reason |
|---|---|---|---|
| No metadata audit findings. |
DRC / ERC Findings
| Severity | Source | Type | Location | Message |
|---|---|---|---|---|
| error | drc | clearance | {‘x’: 175.142013, ‘y’: 138.877608} | PTH pad 1 [+5VL] of J3 |
| error | drc | clearance | {‘x’: 70.494028, ‘y’: 76.293608} | Zone ‘Ground’ [GND] on B.Cu, priority 1 |
| error | drc | hole_clearance | {‘x’: 175.142013, ‘y’: 138.877608} | PTH pad 1 [+5VL] of J3 |
| error | drc | hole_clearance | {‘x’: 70.494028, ‘y’: 76.293608} | Zone ‘Ground’ [GND] on B.Cu, priority 1 |
| error | drc | starved_thermal | {‘x’: 70.494028, ‘y’: 76.293608} | Zone ‘Ground’ [GND] on B.Cu, priority 1 |
| error | drc | starved_thermal | {‘x’: 180.222013, ‘y’: 138.877608} | PTH pad 2 [GND] of J3 |
| error | drc | solder_mask_bridge | {‘x’: 175.142013, ‘y’: 138.877608} | PTH pad 1 [+5VL] of J3 |
| error | drc | solder_mask_bridge | {‘x’: 70.494028, ‘y’: 76.293608} | Zone ‘Ground’ [GND] on B.Cu, priority 1 |

