SPCoast
Railroading on the Southern Pacific Coast

New pages

From SPCoast

Jump to: navigation, search

Showing below up to 50 results starting with #1.

View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).

  1. 20:11, 13 May 2012 ‎License (hist) ‎[455 bytes] ‎Plocher (Talk | contribs) (New page: == Licensing == This documentation is licensed under the Creative Commons [http://creativecommons.org/licenses/by-sa/3.0/ Attribution-ShareAlike License 3.0] Source code and libraries a...)
  2. 01:36, 13 May 2012 ‎Loconet Shield (hist) ‎[2,836 bytes] ‎Plocher (Talk | contribs) (New page: == Introduction == Board Schematic PCB layout See also [[Loconet_br...)
  3. 05:21, 13 April 2012 ‎IOShield PSX Adapter (hist) ‎[755 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield Adapter for DCC Specialties PS-X DCC Circuit Breaker== PSX-IOShield Adapter 1.0 A simple adapter for PSX DCC CBs. The following files can be download...)
  4. 01:49, 17 March 2012 ‎IOShield Code (hist) ‎[7,726 bytes] ‎Plocher (Talk | contribs) (New page: ==Library header== <pre> - I2Cexpander.h - Library for flashing Morse code. Created by John Plocher Released into the public domain. - #ifndef I2Cextender_h #define I2Cextender_h ...)
  5. 05:39, 16 March 2012 ‎DCC Circuit Breaker (hist) ‎[5,112 bytes] ‎Plocher (Talk | contribs) (New page: == Arduino compatible DCC Circuit Breaker== This project started because I wanted to be able to remotely turn on/off the track power to all the tracks associated with a control point, as ...)
  6. 20:34, 13 October 2011 ‎Laser Cut Badges (hist) ‎[10,538 bytes] ‎Plocher (Talk | contribs) (New page: I was over at the [http://techshop.ws/ts_sanjose.html San Jose TechShop] the other night taking a "Safety and Basic Use" [http://techshop.ws/take_classes.html?storeId=5&categoryId=10 class...)
  7. 19:36, 13 October 2011 ‎Arduino Semaphore Example2 (hist) ‎[2,230 bytes] ‎Plocher (Talk | contribs) (New page: == Arduino demo sketch showing how to drive a 3-position semaphore == This sketch uses a BareBones Arduino configured with a servo on A1, and 1K pullups on D2 and D3 [[Image:BBBSemaphor...)
  8. 05:27, 6 October 2011 ‎IOShield Detector (hist) ‎[4,505 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield 6-pin RJ11 Block Occupancy Detector== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.cadsoftusa.com Eagle CAD]. I get the ...)
  9. 00:36, 6 October 2011 ‎IOShield LED Driver (hist) ‎[606 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield 6-pin RJ11 LED Driver== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.cadsoftusa.com Eagle CAD]. I get the boards fabrica...)
  10. 23:44, 5 October 2011 ‎IOShield Turtle (hist) ‎[2,500 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield 6-pin RJ11 Tortoise Driver== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.cadsoftusa.com Eagle CAD]. I get the boards fa...)
  11. 23:39, 5 October 2011 ‎IOShield Signal Driver (hist) ‎[622 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield 6-pin RJ11 Signal Driver== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.cadsoftusa.com Eagle CAD]. I get the boards fabr...)
  12. 23:29, 5 October 2011 ‎IOShield breakout (hist) ‎[616 bytes] ‎Plocher (Talk | contribs) (New page: == IOShield 6-pin RJ11 Breakout Board== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.cadsoftusa.com Eagle CAD]. I get the boards fab...)
  13. 19:37, 27 January 2011 ‎CMRI Adapters (hist) ‎[1,342 bytes] ‎Plocher (Talk | contribs) (New page: == C/MRI Molex to RJ45 Adapters== The schematics and PCB layouts shown here were created using the free tools provided by [http://www.expresspcb.com ExpressPCB], which also provides high q...)
  14. 05:35, 26 January 2011 ‎IOShield (hist) ‎[5,491 bytes] ‎Plocher (Talk | contribs) (New page: Arduino IOShield 1.0 Status: Waiting for prototype PCB boards... A simple I2C based 32-pin Arduino I/O Shield with monitoring LEDs on each pin (Active-L...)
  15. 04:29, 26 January 2011 ‎PanelObjects (hist) ‎[2,327 bytes] ‎Plocher (Talk | contribs) (New page: Panel Objects 1.0 Status: Waiting for prototype PCB boards... I'm looking for an easier way to construct control panels. Drilling holes for buttons, L...)
  16. 02:50, 26 January 2011 ‎SimpleSMC (hist) ‎[1,458 bytes] ‎Plocher (Talk | contribs) (New page: Simple SMC 1.1 Status: Waiting for prototype PCB boards... This is a simplified version of Chubb's SMC board, but built around a MosFET driver chip that d...)
  17. 21:24, 23 January 2011 ‎FastClock Shield (hist) ‎[4,802 bytes] ‎Plocher (Talk | contribs) (New page: FastClockProtoboard This is a prototype Arduino shield for a Loconet fast clock. It is based on my standard Loconet interface and includes a daug...)
  18. 06:45, 14 December 2010 ‎NBD NETTY (hist) ‎[1,124 bytes] ‎Plocher (Talk | contribs) (New page: Starting at the top, the Server simply parses command line arguments, instantiates the protocol stack and binds it to a port. I used the params Map to pass the command line arguments to...)
  19. 06:43, 14 December 2010 ‎NBD Mina (hist) ‎[10,512 bytes] ‎Plocher (Talk | contribs) (New page: Full maven project source code: [http://www.spcoast.com/pub/NBD_Mina.tar.gz Netty implemented with Mina] (gzip'd tar file) Apache Open Source License. Starting at the top, the Server simp...)
  20. 07:09, 25 November 2010 ‎Java NBD Server (hist) ‎[3,357 bytes] ‎Plocher (Talk | contribs) (New page: One of the basic components of Cloud Computing is a Network Block Device - its "disks" or "volumes" are the foundation upon which much of the rest of the infrastructure is built. As part ...)
  21. 04:57, 30 September 2010 ‎OpenLCB (hist) ‎[6,262 bytes] ‎Plocher (Talk | contribs) (New page: Below is a prototype Arduino shield for Loconet, CAN and openLCB experimentation. Category:ArduinoCategory:ElectronicsCategory:openLCB)
  22. 04:53, 12 August 2010 ‎Katy Dickinson (hist) ‎[1,143 bytes] ‎Plocher (Talk | contribs) (New page: * ''' Employment Objective''' : Katy Dickinson is looking for a principal in-house or consulting position in business process creation or re-engineering, in the area of mentoring, intelle...)
  23. 04:50, 12 August 2010 ‎John Plocher (hist) ‎[823 bytes] ‎Plocher (Talk | contribs) (New page: * John Plocher is a senior software architect and engineer with a passion for UNIX systems-level architecture, open source development, process design and model train electronics. * While...)
  24. 06:06, 20 July 2010 ‎BatchPCB-howto (hist) ‎[4,176 bytes] ‎Plocher (Talk | contribs) (New page: I use the following workflow to upload and order boards from [http://batchpcb.com BatchPCB] First, set up EAGLE and customize it's environment and behavior # Obtain the latest version of...)
  25. 01:21, 20 July 2010 ‎CANBusBreadboard (hist) ‎[1,699 bytes] ‎Plocher (Talk | contribs) (New page: == Introduction == Schematic PCB layout The CANBus Breadboard interface is a simple experiment...)
  26. 23:43, 19 July 2010 ‎LoconetBreadboard (hist) ‎[2,799 bytes] ‎Plocher (Talk | contribs) (New page: == Introduction == Schematic PCB layout The Loconet Breadboard interface is a simple experim...)
  27. 16:47, 7 July 2010 ‎ControlPoint (hist) ‎[11,834 bytes] ‎Plocher (Talk | contribs) (New page: Image:DangerShield.jpg Category:Arduino)
  28. 01:16, 27 February 2010 ‎OpenSolaris IRC Bot (hist) ‎[10,125 bytes] ‎Plocher (Talk | contribs) (New page: == ICR Bot for OpenSolaris Registrations == We needed a quick hack to monitor the OpenSolaris annual meeting for member registrations - a task which in last years had been done by hand. ...)
  29. 21:22, 6 October 2009 ‎Radio Frequencies (hist) ‎[2,304 bytes] ‎Plocher (Talk | contribs) (New page: <table border> <th colspan=2>CALTRAIN: SAN FRANCISCO<br>to CP COAST (Santa Clara)</th><tr> <td align="center" colspan=2><img src="caltrain.gif" width=99 height=66></td><tr> <td>Road</td><...)
  30. 01:52, 12 December 2008 ‎Arduino Loconet Example2 (hist) ‎[3,635 bytes] ‎Plocher (Talk | contribs) (New page: == Arduino demo sketch showing interrupt driven LocoNet TX and RX functionality== This sketch is hardcoded to use ICP pin 8 (port PINB bit PB0) for input from LocoNet via a "usual" LM311 ...)
  31. 00:21, 3 December 2008 ‎Arduino Loconet (hist) ‎[6,764 bytes] ‎Plocher (Talk | contribs) (New page: // test LocoNet Receive functionality // Hardcoded to use ICP pin 8 (port PINB bit PB0) for input from LocoNet #include <SoftwareSerial.h> #include <avr/wdt.h> #include <avr/io.h> #includ...)
  32. 19:54, 17 November 2008 ‎John Plocher Resume (hist) ‎[8,498 bytes] ‎Plocher (Talk | contribs) (New page: ==John Plocher== Location: San Francisco Bay Area Industry: Computer Software ===Current=== * Governing Board Member at OpenSolaris Community * Board Member at Silicon Valley Lines * Me...)
  33. 04:22, 15 October 2008 ‎XyloTiger (hist) ‎[2,348 bytes] ‎Plocher (Talk | contribs) (New page: <pre> // Make music with servos and a Tiger Xylopiano // by John Plocher // Application: several servos with wooden hammers #include <Servo.h> int servo1Pin = 14; // pwm outputs fo...)
  34. 04:21, 15 October 2008 ‎ServoBells (hist) ‎[6,131 bytes] ‎Plocher (Talk | contribs) (New page: ''July 21, 2008'' This example was inspired by JD Barnhart's "Ruby on Bells" RAD demo (see http://www.vimeo.com/1272402), but using standard Arduino (and not Ruby) code. This [http://www...)
  35. 04:17, 15 October 2008 ‎DangerShield (hist) ‎[4,287 bytes] ‎Plocher (Talk | contribs) (New page: <pre> // Danger Board v1.0 Demo Script // By: Zach Hoeken (hoeken@gmail.com) // As modified by John.Plocher (@gamil) // More info: make.nycresistor.com/ds-1.0 //our setup stuff #include "...)
  36. 23:47, 29 November 2007 ‎SPINS (hist) ‎[2,302 bytes] ‎Root (Talk | contribs) (New page: SPINS is a standard method of identifying industries and switching zones, tracks and consignee loading and unloading spots. By giving zones, tracks and spots certain designated numbers, w...)
  37. 21:34, 29 November 2007 ‎CMRI SBHRS (hist) ‎[3,204 bytes] ‎Root (Talk | contribs) (New page: This is the C++ source base for the SBHRS CMRI based HO Layout. [http://web.spcoast.com/pub/rr-20040911/ SBHRS CMRI-20020806 Sources] {| | colspan="2" || Header Files |- ! File !! Descrip...)
  38. 17:27, 29 November 2007 ‎Layout Plans (hist) ‎[277 bytes] ‎Root (Talk | contribs) (New page: Image:Layout-staging.gif Image:Layout-sanjose.gif Image:Layout-santaclara.gif Category:Layout)
  39. 07:21, 29 November 2007 ‎Layout Specifications (hist) ‎[1,872 bytes] ‎Root (Talk | contribs) (New page: ==Prototype Background== *Railroads ** Southern Pacific ** Union Pacific ** ACE ** Caltrain *Era ** Modern era, conceptually soon after UP's merger with SP * Location ** From San Jose/Tam...)
  40. 02:14, 29 November 2007 ‎Turtle Connections (hist) ‎[7,927 bytes] ‎Root (Talk | contribs) (New page: == Connecting the Turtle to the Tortoise == J-Tortoise (the 8-pin connector) on the Turtle daughterboard connects "1 to 1" with the 8 pins on a Tortoise switch machine. The Turtle daughte...)
  41. 01:16, 29 November 2007 ‎Turtle Theory of Operation (hist) ‎[10,095 bytes] ‎Root (Talk | contribs) (New page: ==Overview== ===MainBoard=== <div style="float:right;"> turtle-3.2.2-overview-mainboard.png </div> The Turtle is a multi-board set made up of a mainboard and 4 daughterboards. The ma...)
  42. 23:53, 28 November 2007 ‎Turtle Testing (hist) ‎[4,816 bytes] ‎Root (Talk | contribs) (New page: ==Testing and IC installation == Test Slder joints and component placement '''DO NOT install ANY of the Integrated Circuits until explicitly directed!''' * Check to make sure you install...)
  43. 23:29, 28 November 2007 ‎Turtle LocoIO Configuration (hist) ‎[2,911 bytes] ‎Root (Talk | contribs) (New page: == LocoIO PIC Firmware Programming with MicroChip's ICSP == The Detector board has a Microchip-compatible ICSP interface for updating the firmware programming on the PIC. This interface w...)
  44. 23:20, 28 November 2007 ‎Turtle Construction (hist) ‎[26,499 bytes] ‎Root (Talk | contribs) (New page: ==Parts List== <h1 class="newpage"> Turtle Parts List</h1> <p> <table id="partslist"> <tr><th colspan="4">Resistors </th></tr> <tr><th>Part Number </th><th> Value </th><th> Description </...)
  45. 22:50, 28 November 2007 ‎Detector Track Connections (hist) ‎[483 bytes] ‎Root (Talk | contribs) (New page: == Connecting the detector to the track == <div style="padding-left:2em; margin-left:1em;margin-bottom:1em;float:right;"> Image:DetectorRailConnections.gif </div> The Remote sensor sho...)
  46. 07:10, 28 November 2007 ‎Detector Testing (hist) ‎[3,936 bytes] ‎Root (Talk | contribs) (New page: ==Testing and IC installation == Test Slder joints and component placement '''DO NOT install ANY of the Integrated Circuits until explicitly directed!''' * Check to make sure you install...)
  47. 06:55, 28 November 2007 ‎Detector Construction (hist) ‎[6,743 bytes] ‎Root (Talk | contribs) (New page: == Parts List == {| |+Resistors !Part Number !!Value !!Description |- |R1 ||10K 1/4w 5% ||Brown Black Orange |- |R2-18 ||1K 1/4w 5% ||Brown Black Red |- |R20 ||220K 1/4w 5% ||Red Red...)
  48. 06:34, 28 November 2007 ‎Detector LocoIO Configuration (hist) ‎[1,659 bytes] ‎Root (Talk | contribs) (New page: ==LocoIO SV Configuration with DeLoof's LocoIO programmer== Each of the 16 detection blocks controlled by the Detector appears as a single LocoIO port: {| border=1 ! Block !!Port !!Descr...)
  49. 06:29, 28 November 2007 ‎Detector circuit (hist) ‎[6,635 bytes] ‎Root (Talk | contribs) (New page: == Circuit Description == === Power Supply === Power Supply The Detector is powered by an external 1 Amp 8-15 VAC source and has an internal 5v D...)
  50. 21:38, 20 October 2007 ‎Project Assembly Notes (hist) ‎[5,487 bytes] ‎Root (Talk | contribs) (New page: First identify all the parts and understand their markings: Resistors are marked with multi-colored bands that signify their resistance in ohms. Diodes have a black band at one end, electr...)

View (previous 50) (next 50) (20 | 50 | 100 | 250 | 500).

Retrieved from "http://www.spcoast.com/wiki/index.php/Special:Newpages"